Everything we sell, new and used. Filter by category, or tell us what you need and we'll find it.
Used
Clean commercial-chassis pumper with low miles, fresh pump service, and a 5-man cab. Ready for a rural department that needs a dependable first-out engine.
Used
Elliptical 2000-gallon tanker/tender with three-sided dumps, a 500 GPM PTO pump, and a portable tank rack. Built for water shuttle in a rural district.
Used
Light-duty walk-around rescue with a 16-foot aluminum body, PTO generator, light tower, and cascade system. Low miles for its age.
New
Complete SCBA from the major manufacturers, configured to your department: cylinder duration, facepiece sizes, integrated PASS, telemetry, and RIT options.
Used
Serviceable SCBA packs taken in on trade from a department that upgraded. Each pack is inspected, cleaned, and sold complete with a facepiece and 30-minute cylinder.
New
Rapid intervention air supply with UAC fitting, 60-minute cylinder, facepiece, and carry bag. Matched to your department's SCBA brand.
New
Replacement facepieces for the major SCBA brands, new or reconditioned with new lenses and head harnesses. Fit-test kits and spectacle kits available.
New
New composite cylinders with a full 15-year service life and fresh hydro date. Sold with the valve to match your SCBA brand.
Used
Inspected used composite cylinders with a current hydrostatic test and at least five years of service life remaining. Valves to fit the major SCBA brands.
New
Long-duration cylinders for RIT packs, hazmat, and extended operations. New composite construction, 15-year life.
Used
Low-pressure aluminum cylinders for older 2216 psi SCBA. No service-life limit; sold with current hydro.
New
High-pressure breathing air compressor sized to your call volume and cylinder count, installed in your station with a fresh air quality test on commissioning.
New
Gas or diesel engine-driven compressor for mobile air support, trailers, and rescue trucks. Built on a skid or enclosed trailer with cascade and fill station.
Refurbished
A traded-in station compressor rebuilt in our shop: new valves, filters, and belts, fresh oil, and a documented air quality test. Installed and warrantied.
New
Enclosed fill station for two SCBA cylinders at a time, with interlocked door, fill controls, and gauges. Wall or floor mount.
New
Complete fill system: three-position containment station, four 6000 psi storage cylinders on a rack, cascade manifold, and controls. Installed and tested.
Used
Traded-in two-position containment fill station, inspected, re-gauged, and pressure tested. A budget-friendly upgrade from filling cylinders in the open.
New
Structural turnout coats and pants measured at your station and built to the current NFPA standard, with the outer shell, thermal liner, and trim options your department specifies.
New
Traditional leather-look and modern composite structural helmets with faceshields or goggles, in your department colors with custom fronts.
New
Outfit a new member or a whole roster with a complete PPE package priced per firefighter: particulate-blocking hood, structural gloves, leather or rubber boots, and helmet.
New
Lightweight wildland firefighting ensemble for brush truck crews: jacket, pants, web gear, fire shelter, goggles, and helmet.
Used
Trade-in turnout sets with manufacture dates under 10 years, advanced-cleaned and inspected, sold with their inspection record. A stopgap for departments between grant cycles.
New
Cordless hydraulic spreader, cutter, and telescoping ram with batteries and chargers. No power unit, no hoses, ready to work off the truck in seconds.
New
Four telescoping struts with bases, straps, and a storage bag for stabilizing vehicles on their side or roof before extrication.
New
Hand-held thermal imager for search, overhaul, and size-up, with a truck-mount charger and a spare battery. Demo units available.
New
A starter rope rescue cache for low-angle rescue: static kernmantle lifeline, anchor straps, carabiners, pulleys, descent control, and two harnesses in a rope bag.
New
Lightweight double-jacket attack hose in 50-foot lengths with aluminum NH couplings, in your choice of color for crosslays and preconnects.
New
Rubber-covered LDH supply hose in 100-foot lengths with 5" Storz couplings for hydrant and relay operations.
New
Heavy-duty electric rewind reel loaded with 150 feet of 1-inch booster hose and a fog nozzle, ready to mount on a brush truck or skid unit.
New
Outfit every crosslay and preconnect: adjustable fog nozzles with pistol grips, smooth-bore tips with shutoffs, and break-apart combinations.
New
Lightweight single-jacket forestry hose for brush and wildland use, in 100-foot lengths with 1" NPSH couplings.
New
A complete brush truck skid: 200-gallon poly tank, 18 hp high-pressure pump, electric rewind reel with 150' of booster hose, and a plumbing package. Fitted to your truck in our shop.
New
Heavier skid for F-450/F-550-class trucks: 300-gallon tank with 10-gallon foam cell, Class A foam proportioner, and two electric reels.
New
A compact skid for side-by-side UTVs: 70-gallon tank, small-engine pump, 100' reel, and a frame sized for a UTV bed.
New
Two-stage portable pump that moves volume for drafting or pressure for long hose lays. Carry handles, suction hose, and strainer included.
New
Baffled polypropylene water tank sized for pickup-mounted brush units, with sump, 3-inch fill, and tank-to-pump fittings.
New
Rectangular poly tanker tank with internal baffles, 10-inch rear dump provision, and fill and overflow fittings, built to your chassis dimensions.
New
A 500-gallon water tank with an integrated 20-gallon foam cell for mini-pumpers, skid units, and rescue-pumpers.
New
Two LED scene lights on telescoping tripods with a quiet inverter generator and cord reels — a complete lighting package for a brush truck or rescue.
New
Aluminum ground ladders in the standard pumper complement: 24-foot two-section extension, 14-foot roof ladder with hooks, and a 10-foot folding attic ladder.
New
A four-gas atmospheric monitor (O2, LEL, CO, H2S) with calibration gas, regulator, and a docking station for bump tests and records.
Used
Sale pending
Type 6 brush truck on a 6.7L Power Stroke with a 300-gallon skid, 18 hp pump, foam proportioner, and front bumper monitor. Tight, rust-free chassis.
Used
Sold
Custom-cab pumper with a Waterous 1500 GPM pump and 750-gallon tank. Sold to a department in Missouri.